Drahtlose Mikrofone Live - Empfänger
EK 2000 IEM
Bodypack-Empfänger für In-Ear-Monitoring. Zusammen mit den Ohrkanal-Hörern IE 4 ermöglicht er eine perfekte Kontrolle der eigenen Performance. Adaptive Diversity-Technik sorgt für hohe Empfangssicherheit.
Bitte wählen Sie eine Produktvariante

Der Empfänger dieses Wireless Monitoring Sets arbeitet mit der Adaptive-Diversity Technik. Dabei wird das Kabel des Ohrhörers als zweite Antenne verwendet. So können deutlich weniger Aussetzer erzielt werden. Im Zusammenspiel mit den präzise reproduzierenden Ohrkanal-Hörern IE 4 vermittelt der EK 2000 IEM ein authentisches Klangbild des Livesounds und ermöglicht so eine perfekte Kontrolle der eigenen Performance.

  • Robustes Ganzmetallgehäuse

  • Bis zu 3000 Frequenzen in bis zu 75 MHz Schaltbandbreite

  • 20 Festfrequenzbänke mit bis zu 32 kompatiblen Presets

  • 6 Bänke mit bis zu 32 frei durchstimmbaren Kanälen

  • Adaptive-Diversity Technik für hohe Betriebssicherheit

  • Pilotton-Squelch einstellbar in 2dB-Schritten für störungsfreien Empfang

  • Scan-Funktion zum Finden freier Empfangskanäle

  • Drahtlose Synchronisation der Empfängerparameter vom Sender

  • Bedienungsfreundliche Menüsteuerung über hinterleuchtetes Graphik-Display

  • Kristallklarer Sound durch HDX-Compander

  • Erweiterter NF-Frequenzgang

  • Hinterleuchtetes Graphik-Display

  • 4-stufige Batteriestatus Anzeige

  • Ladekontakte zum Aufladen von BA2015

  • Auto-Lock Funktion verhindert versehentliches Ändern der Einstellungen

  • HiBoost, Einstellbarer Limiter, Stereo/Focus mode, Balance am Empfänger wählbar

  • Universell einsetzbar durch umfangreiches Zubehörangebot

Reviews
Be the first to write a review.

Spezifikationen
Lieferumfang
  • 1 Diversity-Empfänger EK 2000 IEM
  • 1 Ohrhörer IE 4
  • 1 Bedienungsanleitung
  • 1 Frequenzbeiblatt

Support
Kontaktieren Sie uns
Produkt Support Nummer

(+41) 44 751 75 75


FAQ
  • Can the 2000 Series products utilize a rechargeable battery system?

    For the Sennheiser 2000 Series equipment there is a proprietary rechargeable battery system that is designed specifically for these products to ensure the best operation time possible when using rechargeable batteries.
    The rechargeable battery system consists of the following components:
    - BA2015G2 = (rechargeable battery pack)
    - L2015 = (charger for two units)
    - LA2 = (charging slot-in adapter for a G3 or 2000 series handheld microphone)
    - NT1-120 = (power supply for a single L2015 charger)
    - NT3-1-US = (power supply for up to three (3) L2015 chargers daisy chained together)
    NOTE: The BA2015G2 battery pack can be placed directly into the L2015 charger for charging. When using the BA2015G2 battery pack in a SK or EK device the whole body pack can slot directly into the charger to charge the battery packs allowing charging in the device.
    When a handheld microphone is used in conjunction with the LA2 adapter the handheld microphone and LA2 adapter can slot directly into the charger to charge the battery pack without having to remove the battery pack from the handheld microphone.



  • How do I choose a frequency range for wireless systems (Frequency Finder Explained)?

    To help select an appropriate operating frequency range for wireless microphones and wireless IEM systems for your geographical area we offer a tool on our website called the Frequency Finder: (http://en-us.sennheiser.com/service-support-frequency-finder).

    From the control panel in the upper left corner of the page type in your zip code and click on your town or city from the pop-up list. Once the zip code is entered and the town/city selected then click SEND. The Frequency Finder queries the FCC database and reports back a list of broadcast facilities and their relative signal strengths at your location (determined by power and distance).

    The results of the Frequency Finder should be interpreted as follows:

    - "white" = indicates strong broadcast facility signals that might disrupt your system and would likely cause issues if these frequencies were to be used.
    - "yellow" = indicates weak broadcast facility signals that should be able to be worked around to find some available frequencies to use.
    - "green" = indicates vacancies (ie: no broadcast facility signals) and should result in plenty of available frequencies to use.

    NOTE: Once the Frequency Finder results list has been generated a new drop down menu labelled RANGE will appear just above the RESET and SEND buttons. From the RANGE drop down menu you can select the product range that you are interested in and once a product range is selected the different operating frequency ranges of the selected product range will overlay on the Frequency Finder results list as a pale BLUE HIGHLIGHT so you can see where the frequency ranges fall. From here you can review the Frequency Finder results list to determine what operating frequency range would be optimal for your region. 

    The default settings of the Frequency Finder are set for general use both indoors and outdoors. If the initial results list doesn't appear to show any available frequencies try changing the "ATT" drop down menu from 30 dB to 40 dB and the color indicators for available frequencies will adjust accordingly.

    NOTE: In a vacant television channel you can operate up to 8 wireless microphone systems or about 6 wireless IEM systems.

    NOTE: All frequencies above 700MHz are reserved by the government to facilitate the use of internet capable mobile devices. Government regulations prohibit the sale and use of equipment that operates in these frequencies in the United States.



Downloads

  • Sicherheitshinweise
    • Sicherheitshinweise 2000/2000 IEM Series (4 MB) Download

  • Quick Guides
    • Kurzanleitung 2000 IEM Series (1.4 MB) Download

      Kurzanleitung für SR 2000 IEM, SR 2050 IEM und EK 2000 IEM

    • Kurzanleitung EK 2000 IEM (520 KB) Download

  • Technische Daten
    • Technische Daten 2000 IEM Series (3.6 MB) Download

      Technische Daten für SR 2000 IEM, SR 2050 IEM und EK 2000 IEM

  • Frequenzdatenblätter
    • Frequenzblatt Bereich IEM GBw (606 - 678 MHz) (210 KB) Download

    • Frequenzblatt Bereich 2000 IEM Aw (516 - 558 MHz) (210 KB) Download

    • Frequenzblatt Bereich IEM Bw (626 - 698 MHz) (200 KB) Download

    • Frequenzblatt Bereich IEM Cw (718 - 790 MHz) (210 KB) Download

    • Frequenzblatt Bereich IEM Dw (790 - 865 MHz) (210 KB) Download

    • Frequenzblatt Bereich IEM Gw (558 - 626 MHz) (210 KB) Download

  • Technische Informationen
    • Systemkonfiguration 2000er Serie (3.8 MB) Download

  • Digitale Broschüren
    • Digitale Broschüre 2000er Serie (2.2 MB) Download

  • Datenblätter
    • Produktdatenblatt EK 2000 IEM (260 KB) Download

  • EU-Konformitätserklärung
    • EU-Konformitätserklärung Serie 2000 IEM (400 KB) Download

  • Firmware Updates
    • Series 2000 / Series 2000 IEM - Firmware Version 1.8.1 (790 KB) Download

  • Bedienungsanleitung
    • Bedienungsanleitung EK 2000 IEM (650 KB) Download

    • Bedienungsanleitung SR 2000 IEM / SR 2050 IEM / EK 2000 IEM [HTML] Download