SKM 5200
Weltklasse-Handsender für Live-Veranstaltungen. Kompatibel mit allen Kapseln der 5000er-Serie und den Neumann-Mikrofonköpfen. Mikrofonempfindlichkeit in 1-dB-Schritten einstellbar. Einfache Bedienung per Jog Dial.
Bitte wählen Sie eine Produktvariante

Der SKM 5200 knüpft an den Erfolg des Weltklasse-Mikrofons SKM 5000 an. Bewährte Elemente wie Design, Kapseln und Modularität wurden übernommen. Die Mechanik, Elektronik und das Bedienkonzept wurden komplett überarbeitet und auf die höchsten Anforderungen bei Live-Einsätzen zugeschnitten.

Der SKM 5200 überzeugt durch eine robuste Mechanik, hohe Frequenzagilität, und eine menügesteuerte Benutzerführung über ein hinterleuchtetes LC-Display.

Den SKM 5200 gibt es in drei Farbvarianten: Schwarz, Nickel und Hämatit. Der Handsender ist kompatibel zu allen Kapseln sowie Batterie und Akkufächern der 5000er Serie und den Neumann Mikrofonköpfen.

  • 36 MHz Schaltbandbreite

  • Robustes Gehäuse

  • Hinterleuchtetes Display

  • Einfache Bedienung per Jog Dial

  • Durchstimmbare Frequenzen in 5 kHz Schritten

  • 3-stufig einstellbares Low Cut Filter

  • Mikrofonempfindlichkeit einstellbar in 1 dB Schritten

  • Farbkennzeichnungen in 8 Farben

  • 8 h Betriebsdauer für noch mehr Übertragungssicherheit

Pro Talk – Die Video Serie

Pro Talk – Die Video Serie

Weltbekannte Toningenieure teilen Tipps, Tricks und Geschichten.
Abonnieren und keine Episode unserer Pro Talk Video Serie auf YouTube verpassen! mehr
Reviews
Be the first to write a review.

Spezifikationen
Lieferumfang

Support
Kontaktieren Sie uns
Produkt Support Nummer

(+41) 44 751 75 75


FAQ
  • What are the operating frequency ranges of the different wireless microphone systems?



  • What do I do when there is "noise" in the wireless system?

    It is likely that the noise/static/interference you’re experiencing is being caused by a background RF signal from an external source (ie: broadcast TV or radio stations, other wireless microphones, etc) on the same frequency as your wireless system.

    This can be confirmed this by turning off the transmitter and checking the receiver’s display. If there is an RF signal showing on the receiver's display when the transmitter is off that indicates that the receiver is picking up an RF signal from an external source and the receiver is trying to tune this external RF signal which will sound like a broad white noise.

    One of the most important steps for proper setup is turning on the receiver first and checking what it sees in the absence of your microphone signal. If the receiver sees an RF signal being generated by an outside source (ie: noise) then you need to retune the system. Depending on which system is being used the exact steps on how to change frequencies will vary. NOTE: When using multiple wireless systems the frequencies need to be co-ordinated together to ensure that they do not interfere with each other.

    Once a new frequency is selected get back to the receiver's main display. If there is no RF registering then this new frequency is a "clean" frequency on which to operate.

    Keep in mind the RF environment changes from location to location so it is important to always check the receiver for RF levels before turning on the transmitter. It is best practice to always do a frequency scan when using equipment in a new location.

    The RF environment is often constantly changing so a frequency scan is really only completely accurate for the exact time that the frequency scan is done (ie: a frequency scan done on Wednesday night could yield different results to a frequency scan done on Sunday morning). Ultimately to ensure a frequency scan is still valid you want to turn on the receivers and leave the microphones off. In this state the receivers should be showing no RF signal to indicate that they are on a clean usable frequency. If you turn on the receivers (with the microphones off) and you are seeing a lot of RF activity that indicates that something in the RF environment has changed and now the frequency which was previously "clean" (and hence usable) is now "dirty" (ie there is an external RF signal on it) and you will need to set the receiver to use a different frequency.



  • What frequency can I use outside of the United States?

    There are no universal rules which govern the use of wireless microphone equipment globally. The rules and regulations regarding which frequencies are allowed for wireless microphones vary widely by country. All Sennheiser products that are sold in the US are congruent to the US rules and regulations as mandated by the FCC.

    We can provide information regarding rules and regulations for the US, however because rules and regulations vary from country to country, we cannot advise which frequencies to use outside of the US. Unfortunately there is no universal database that contains all this information. 

    For information about the rules and regulations for a specific country it is recommended that you directly contact the embassy of the country in question to find out the rules and regulations or contact the Sennheiser subsidiary or partner company in the country in question.  You can find contact details for these subsidiaries and partner companies here: (http://en-us.sennheiser.com/service-support-contact-service-partner-worldwide).



  • Why is it illegal to use wireless microphones in the 700 MHz range in the USA?

    In June 2010 the FCC instituted regulations that made it illegal to operate wireless microphones within the 700 MHz frequency range in the United States.

    With the transition to digital television TV broadcasters vacated a large section of the UHF spectrum (from 698 to 806 MHz) so the FCC auctioned the 700 MHz band to the highest bidders (including AT&T and Qualcomm) to facilitate the development of wireless broadband Internet service throughout the United States. In addition, the FCC has reserved select frequencies in the 700 MHz band for emergency and national security purposes.

    NOTE: The FCC is the Government agency tasked to regulate interstate communications by radio, television, wire, satellite, and cable in all 50 states, the District of Columbia and U.S. territories. The FCC sets the guidelines and regulations for all broadcast equipment (including wireless microphones).



Downloads

  • Bedienungsanleitung
    • Bedienungsanleitung SKM 5200 (1.5 MB) Download

  • Datenblätter
    • Product specification SKM 5200 (660 KB) Download

  • Application Software
    • Sennheiser Transmitter Manager - Version 3-3-1 (6.4 MB) Download